RIFF JTAG -Huawei Ideos X1 U8180 (Huawei Gaga) Unbrick – Dead Boot repair

14.09.2012  RIFF JTAG -Huawei Ideos X1 U8180 (Huawei Gaga) Unbrick – Dead Boot repair

Resurrecting Huawei U8180 is simple with RIFF Box.
Connection can be established with charger connected while battery is inside.

To resurrect Huawei U8180:

•  Solder JTAG cable to Huawei U8180 JTAG pads;
•  Connect Huawei U8180 tablet’s charger for power;
•  Make sure Huawei U8180 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  De-solder JTAG wires;

Now device is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ key and press ‘Power ON’ button.

.

RIFF JTAG – Samsung GT-S7500L Galaxy Ace Plus Unbrick – Dead Boot repair

14.09.2012  RIFF JTAG – Samsung GT-S7500L Galaxy Ace Plus Unbrick – Dead Boot repair

Resurrecting Samsung S7500L is easy with RIFF box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.

To resurrect Samsung S7500L:

•  Solder JTAG cable to Samsung S7500L JTAG pads;
•  Insert USB Data cable into board and PC;
•  Make sure Samsung S7500L is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.

RIFF JTAG – Samsung GT-S6102 Galaxy Y Duos Unbrick – Dead Boot repair

14.09.2012   RIFF JTAG – Samsung GT-S6102 Galaxy Y Duos Unbrick – Dead Boot repair

Resurrecting Samsung S6102 is easy with RIFF Box . To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.

To resurrect Samsung S6102:

•  Solder JTAG cable to Samsung S6102 JTAG pads;
•  Connect USB cable to phone and PC;
•  Insert battery;
•  Make sure Samsung S6102 is selected in the list of models;
•  Click Resurrect button;
•  Wait till software signals a successful operation completion;
•  Disconnect USB cable, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.

To enter download mode:

•  Disconnect PC cable;
•  Insert battery;
•  Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
•  If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.

.

RiffBox_Setup_14.09.2012_v1.torrent