Saturday, 13 October 2012


NCK Dongle v8.6 Calculated Perfection - Alcatel - Blackberry - Huawei Update Released

The Daddy of all  the tool that has shacked & shocked other Old known products and made them always watch our section and updates.
NCK Dongle Presents our new update:

NCK Dongle v8.6 Calculated Perfection - Alcatel - Blackberry - Huawei Update Released

Added:

HUAWEI Mobiles Direct Unlock

Fusion2 Direct Unlock (Need Root)
U8665 Direct Unlock (Need Root)


Blackberry

PRD List Updated



Alcatel MTK Unlock Code Calculator Standalone by IMEI & PID

Download support area access software here:

www.nckdongle.com/support.zip
 RIFF JTAG - Week Updates Summary

So, whats new for this week ?
New models:

Samsung SGH-L760 Unbrick – Boot Repair Supported

Repairing bricked Samsung L760 is easy with the RIFF Box.

To resurrect Samsung L760:
  •  Solder JTAG cable to Samsung L760 JTAG pads;
  •  Connect USB cable or instert batteryu;
  •  Make sure Samsung L760 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘9’ key and press ‘Power ON’ button.
.
Repairing bricked Samsung E329I is easy with the RIFF Box. Please note, by default, NRST pad is disabled in this phone. In case you have any troubles with resurrection, shortcut pads A and B shown in shematics in order to enable NRST.
Current resurrector contains Firmware and EEPROM zones for memory chip with ID 0x00EC/0×3013
To resurrect Samsung E329I:
  •  Solder JTAG cable to Samsung E329I JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung E329I is selected in the list of models;
  •  Click Resurrect button;
  •  Choose which areas to flash;
  •  Wait till software signals a successful operation completion;
  •  De-solder JTAG wires;
.

CoolPad 5860 + Unbrick – Dead Boot Repair Supported

Repairing bricked CoolPad 5860+ is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect CoolPad 5860+:
  •  Solder JTAG cable to CoolPad 5860+ JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure CoolPad 5860+ is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
.

Repairing bricked Samsung M130K is easy with the RIFF Box. Samsung M130K is based on the S5PCxxx Processor (ARM core is Cortex-A8).
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on. But note, in very rare cases it is possible that you will have to hold Power On key during initial connection.
In case after resurrection (after you have tried with both boot versions) the download mode is not initiated (LCD remains blank) do repeat resurrection with ‘Clone Gremlin zone’ option checked.
To resurrect Samsung M130K:
  •  Solder JTAG cable to Samsung M130K JTAG pads;
  •  Connect microUSB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung M130K is selected in the list of models;
  •  Make sure a fixed TCK frequency is selected;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On.
.

 Samsung GT-S5830G Galaxy Ace Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung S5830G is easy with the RIFF Box. You need to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung S5830G do this:
  •  Solder JTAG cable to Samsung S5830G JTAG pads;
  •  Insert battery and connect USB cable to phone and PC;
  •  Make sure Samsung S5830G is selected in the list of models;
  •  Click Resurrect button;
  •  Press Power On button shortly if it stops on establish conneciton stage;
  •  Wait few seconds until software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On to enter Download Mode;
.

Samsung GT-S6500 Galaxy Mini 2 (Samsung Jena) Unbrick – Dead Boot Repair Supported


Repairing bricked Samsung S6500 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect Samsung S6500:
  •  Solder JTAG cable to Samsung S6500 JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure Samsung S6500 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.
.

HTC ChaCha A810e Unbrick, IMEI, SuperCID and Simlock repair supported

Repairing bricked HTC ChaCha is easy with the RIFF Box. 
Phone is auto powered on with USB Data Cable connected to the PC. Battery presence may be required.
In case you have no USB cable near, make sure battery is charged enough and hold Power On button during initiation of JTAG connection.
Resurrector will reflash radio’s boot zone and will re-write PDA’s SPL to 1.04.0000 version. Additionally to SPL and Radio zones, the zone which contains Model ID is re-flashed too. Thus after resurrection phone will have Model ID = ‘PH06*****’.
To resurrect HTC ChaCha:
  •  Solder JTAG cable to HTC ChaCha JTAG pads;
  •  Insert USB Data cable into board and PC;
  •  Make sure HTC ChaCha is selected in the list of models;
  •  If you use battery, press Power On key;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press ‘Power ON’ button.
.

Samsung GT-B7510 Galaxy Pro Unbrick – Dead Boot Repair Supported

Repairing bricked Samsung B7510 is easy with the RIFF Box.
Phone is auto powered when USB Data Cable is inserted while battery is inside. If you don’t use USB cable, make sure to hold Power On button during JTAG connection establishing phase.
To resurrect Samsung B7510 do this:
  •  Solder JTAG cable to Samsung B7510 JTAG pads;
  •  Insert battery and connect USB cable to phone and PC;
  •  Make sure Samsung B7510 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait few seconds until software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘OK’ keys and press Power-On to enter Download Mode;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On to enter Emergency Mode;
.

Samsung GT-B5510 Galaxy Y Pro / Galaxy Txt Unbrick – Dead Boot Repair Supported


Repairing bricked Samsung B5510 is easy with the RIFF Box. 
To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung B5510:
  •  Solder JTAG cable to Samsung B5510 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung B5510 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Menu’ keys and press Power-On.
  •  If nothing happens, try an alternative: hold both ‘Volume Up’ and ‘Menu’ keys and press Power-On.
.

Samsung GT-B5620 OmniaPRO 5 / GT-B6520 Omnia 652 Unbrick – Dead Boot Repair Supported


Repairing bricked Samsung B6520 is easy with the RIFF Box.
To power the phone connect USB cable and insert battery. Sometimes it’s needed to press Power On key.
In case phone is not detected de-power phone completely, then wait few seconds, insert USB cable and then insert battery.
To resurrect Samsung B6520:
  •  Solder JTAG cable to Samsung B6520 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung B6520 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold both ‘Volume Down’ and ‘Home’ keys and press Power-On to enter Download Mode;
.



Friday, 12 October 2012

Micro-Box&Dongle V2.1.2.6 SAMSUNG WEEK-END UPDATE:

Added REPAIR IMEI (beta) for NEXT MODELS:

- SAMSUNG GALAXY S3
- SAMSUNG GALAXY S PLUS
- SAMSUNG I9001
- SAMSUNG I9300


Improved REPAIR IMEI for NEXT MODELS:

- SAMSUNG GALAXY S
- SAMSUNG I9000


LGTOOL 1.79 released: added spport for more new LG, ALCATEL and HTC phones!


LGTOOL
by SEtool team

Version 1.79 released!

New version highlights:
Added unlock support for new LG phones, first in the World!
Added 155 new pids and 3 new models for Alcatel


DIRECT DOWNLOAD LGTOOL & SGTOOL
DOWNLOAD LGTOOL & SGTOOL from RAPIDSHARE


New for LGTOOL direct services:

HTC One S, Ville 
- Read Unlock Codes by Cable
LG A200, A230, C330, T500, T505, A250, A255, A258, C330I, T505GO, T510, T515, A235,
T565, T565B, T375, T515DW, T370, KU5900, P970, P970H, P970G, P970N, SU880, P940,
SU870, P720, P940H, P725, P720H, P880 

- added Mcc/Mnc Lock feature - world's first! 
LG MS840 - world's first! 
- Read/Write MEID,ESN
- Read Write Min1,Min2,Mcc,Mnc
- Read Write MDN
- Read/Write SID/NID
- Read/Write OTKSL
- Read/Write SPC
- Read/Write PRL
- Dump/Flash NVM
- File explorer
- Flash Firmware
- Factory reset

LG T385 
- Read/write full
- Read/Write NVM
- Read/Write File System
- Unlock
- Read user code
- Read/Repair IMEI
- Read/patch Bluetooth address
- Fix security
- Flash firmware
- Mcc/Mnc Lock

New for LGTOOL remote services:

LG F200K, F180S, F180K, UN272 - World's first! 
- Calculate unlock codes 
Alcatel 810DX, 668A, 308F 
- Calculate unlock codes 
Alcatel various models 
- Added 155 Provider IDs to Alcatel Remote Calculator.

 Octopus Samsung Software v1.6.4 - N7100 IMEI repair




Octopus Box Samsung Software v1.6.4


  • GT-C3510 - added Read Codes, Repair IMEI, Repair BT Address.
  • GT-C3510T - added Read Codes, Repair IMEI, Repair BT Address.
  • GT-B3410 - added Read Codes, Repair IMEI, Repair BT Address.
  • GT-B3410L - added Read Codes, Repair IMEI, Repair BT Address.
  • GT-B3410W - added Read Codes, Repair IMEI, Repair BT Address.
  • GT-B7722 - added Read Codes, Repair IMEI.
  • GT-N7100 - added Repair IMEI (in Test Mode).
  • GT-P7300 - added Repair EFS.
  • GT-P7300C - added Repair EFS.
  • GT-P7300B - added Repair EFS.
  • GT-P7310 - added Repair EFS.
  • Released some improvements to the main software.


We don't need any warm ups! Octopus Team continuously provides you with stable and frequent bomb updates
every week! More to come, stay with us!

Download Octopus Box Samsung Software v1.6.4

Mirror Link

J.A.U v3.2.2 new Update is ready for YOU! [Nokia SL3 Log Reader]

J.A.U - v.3.2.2 new Update is ready for YOU! 

J.A.U - News and Update Thread: <<< J.A.U news & updates here >>>


Code:
==========================================================

WHATS NEW? (V3.2.2):

  Changes / Updates in Version V3.2.2

  .) ADDED NOKIA SL3 BF-Log file Reading.

      Supported SL3 Phones via F-BUS:

      HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
      2690c              RM-635      RAPS_v3.03_PA
      2700 Classic       RM-561      RAPS_v3.03_PA
      2730 Classic       RM-578      RAPS_v3.03_PA
      2730 Classic       RM-579      RAPS_v3.03_PA
      3600 Slide         RM-352      RAPS_v3.03_PA
      3720 Classic       RM-518      RAPS_v3.03_PA
      5130 XpressMusic   RM-495      RAPS_v3.03_PA
      6303 Classic       RM-443      RAPS_v3.03_PA


      HASH: BAF3A9C3DBFA8454937DB77F2B8852B1
      5310               RM-303      RAPS_v3.01E_PA
      6500 Classic       RM-265      RAP3GS_v2.0E_PA
      6500 Slide         RM-240      RAP3GS_v2.0E_PA


      HASH: CAEEBB65D3C48E6DC73B49DC5063A2EE
      5730s XpressMusic  RM-465      RAPIDOYAWE_v1.13_PA
      N97                RM-505      RAPIDO
      N97                RM-506      RAPIDO
      N97                RM-507      RAPIDO
      N97 Mini           RM-555      RAPIDO


      HASH: 25B977A055BE9B5DEC0C38A2A279C695
      3710a-1            RM-509      RAP3GV4 RAPS2_v4.1/4.11
      3710a-1b           RM-510      RAP3GV4 RAPS2_v4.1/4.11
      3711a-1            RM-511      RAP3GV4 RAPS2_v4.1/4.11
      5630d              RM-431      RAPUYAMA_v1.11_PR_RITSA
      6700 Classic       RM-470      RAPUYAMA_v1.11_PR_RITSA
      6700 Slide         RM-576      RAPUYAMA_v1.11_PR_RITSA
      6700 Slide         RM-577      RAPUYAMA_v1.11_PR_RITSA
      6710 Navigator     RM-491      RAPUYAMA_v1.11_PR_RITSA
      6720 Classic       RM-424      RAPUYAMA_v1.11_PR_RITSA
      6720 Classic       RM-564      RAPUYAMA_v1.11_PR_RITSA
      6730 Classic       RM-547      RAPUYAMA_v1.11_PR_RITSA
      6730 Classic       RM-566      RAPUYAMA_v1.11_PR_RITSA
      6750 Mural         RM-381      RAPUYAMA_v1.11_PR_RITSA
      7230               RM-604      RAP3GV4 RAPS2_v4.1/4.11
      7230               RM-598      RAP3GV4 RAPS2_v4.1/4.11
      E52                RM-469      RAPU_YAMA_POP_1.11
      E55                RM-482      RAPU_YAMA_POP_1.11
      E72                RM-529      RAPU_YAMA_CSP_v1.11
      E72                RM-530      RAPU_YAMA_CSP_v1.11
      E72                RM-584      RAPU_YAMA_CSP_v1.11


      HASH: 7B045400E1752022F9EB80B0DEA9C65D  
      5330               RM-615      RAP3GS2_v4.12
      6303i              RM-638      RAP3GV4 RAPS2_v4.1/4.11
      7230               RM-598      RAP3GV4 RAPS2_v4.1/4.11
      7230               RM-604      RAP3GV4 RAPS2_v4.1/4.11
      X3-00              RM-540      RAP3GV4 RAPS2v4.1/4.11

  .) 15/20 digit NCK will be checked for every log read.
  .) Simlock Status will be checked for every log read.
  .) J.A.U will warn if phone is 20 digit or already unlocked.
  .) JAU BOX, UFS BOX and JAF BOX supported!
  .) Select your needed log file format:
     sha, log, fnx, bcl, oclhashcat 32 and 64 bit bat file.
  .) J.A.U will not create 10 different logs for every phone,
     it will read only 1 log in needed format and will not spam your
     logs folder with mutch of different formats for every log.
     (very usefull when you have to read many phones at once)
  .) Selected format is saved automatically.
  .) Log can be local bruteforced or you can use
     J.A.U SL3 100 Tflops BF SERVERS at: http://jau.cc/sl3


==========================================================
) 15/20 digit NCK will be checked for every log read.

.) Simlock Status will be checked for every log read.

.) J.A.U will warn if phone is 20 digit or already unlocked.

.) JAU BOX, UFS BOX and JAF BOX supported!

.) Select your needed log file format: sha, log, fnx, bcl, oclhashcat 32 and 64 bit bat file.

.) J.A.U will not create 10 different logs for every phone, it will read only 1 log in needed format and will not spam your logs folder with mutch of different formats for every log.
(very usefull when you have to read many phones at once)

.) Selected format is saved automatically.

.) Log can be local bruteforced or you can use J.A.U SL3 100 Tflops BF SERVERS at: http://jau.cc/sl3


 ENTSPERREN.NET - HANDYENTSPERREN and Download Installer

ORT JTAG - Samsung S7500L Repair Dead Boot

ORT - JTAG UPDATE
[11 OCT 2012]

Description : 
  • Samsung GT-S7500L Repair Dead Boot
Release Notes: 
  • Samsung GT-S7500L.dll Released
    • Repair Dead Boot

    Files
  • Samsung_GT-S7500L.dll
Repairing Samsung S7500L
  • Connect Battery and USB Cable
  • Download DLL File "Samsung_GT-S7500L.dll"
  • Place in phones folder
  • Start ORT Plus Latest Version
  • Go to Easy Mode
  • Select Model
  • Click Repair

What's News in the Forum : ORT Team News and Blog :  ORT-JTAG - The Real JTAG'gers

Comments

Top Nav menu

Recent Post

Slider(Do not Edit Here!)

Pages

Navigation (Do not Edit Here!)

Popular Posts