RIFF JTAG -Samsung Galaxy S3 (SGH-i747) Support and more

---

20.07.2012 RIFF JTAG Updates

Whats new:

• Samsung SGH-i747 Galaxy S III LTE Unbrick / Boot repair supported, World First ! ! !
• RIFF JTAG Manager v1.44 released (Added SnapDragon S4 MCU support)
• RIFF Box Firmware v1.33 released ( Read more )
• QUALCOMM ESC6xxx Generic DLL released (Used in Motorola EX130, EX132)
• QUALCOMM MSM7225A Generic DLL released (Used in HTC Pico, HTC Des ire C, Samsung B5510 and more)
• To resurrect Samsung I747:
  •  Solder JTAG cable to Samsung I747 JTAG pads;
  •  Connect USB cable to phone and PC;
  •  Insert battery;
  •  Make sure Samsung I747 is selected in the list of models;
  •  Click Resurrect button;
  •  Wait till software signals a successful operation completion;
  •  Disconnect USB cable, de-solder JTAG wires;
  Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using original Samsung downloader software to restore it to the working state.
  To enter download mode:
  •  Disconnect PC cable;
  •  Insert battery;
  •  Hold ‘Volume Down’ key and press Power-On.

RIFF Torrent Tracker:

• RiffBox_Setup_20.07.2012_v1.torrent

Who rules the Galaxy ? 


www.riffbox.org